What is Slap Type Test Sieve

Thursday February-23 2023  14:52:23

Slap Type Test Sieve is mainly used in laboratories within universities/research institutes/enterprises, with standard test sieves for particle size analysis and detection of granular and powder materials. 0-99 minutes automatic timing device, which can realize timing shutdown and fully automatic screening.

Slap Type Test Sieve can clamp ф200 standard sieves, ф75, ф100 type sieves by being equipped with special fixtures. The height of the beating bar fixed sieve frame can be adjusted, and 2-7 layers of test sieves with different meshes can be installed.

Compared with the experimental sieve, the Slap Type Test Sieve adds a slap-type longitudinal movement, which can sieve more undersize (fine materials).

Slap Type Test Sieve has two modes of belt transmission and gear transmission (belt type slapping sieve and gear type slapping sieve). Belt type Slap Type Test Sieve is designed on the basis of gear type Slap Type Test Sieve.

Relatively speaking, the structure of the belt Slap Type Test Sieve is more compact, and the rotating part adopts standard bearings, which are not easy to wear and easy to replace. If worn, only the belt needs to be replaced;

The geared Slap Type Test Sieve needs to be filled with oil for the first time, and once a fault occurs, the circuit needs to be returned to the factory for repair, which is expensive.

Therefore, the belt Slap Type Test Sieve is better than the gear Slap Type Test Sieve.