Type of Rotary Sieve Shaker

Saturday February-25 2023  09:00:51

Rotary Sieve Shaker has dual motions of rotation and vibration, which can control the time of shaking sieve regularly, with reliable sieving data and convenient operation and maintenance. So what are the types of Rotary Sieve Shaker? .

Top-hit Rotary Sieve Shaker

Top-hit Rotary Sieve Shaker, referred to as top-hit Sieve Shaker, is equipped with a test sieve of ￠200mm or 300mm. It adopts the eccentric principle to make the machine table vibrate and impact regularly, and the material is cut quickly and is not easy to be blocked. It has the advantages of uniform time standard, intensity and frequency to achieve good screening effect.

The following is the parameter configuration of the top-stroke Rotary Sieve Shaker:

model	name	unit	value
01	Sieve diameter	Cm	20
02	Available sieve layers	层	7
03	Sieve aperture	mm	0-0.038
04	Number of shakes	times/min	221
05	Top clicks	times/min	147
06	Radius of gyration	mm	12.5
07	Top drop distance	mm	10mm
08	Motor Power	kW	0.38
09	voltage	Volt	380
10	Motor speed	rev / min	2800
11	machine weight	Kilogram	120
12	Dimensions	mm	586*370*952

Slap-type Rotary Sieve Shaker

Slap-type Rotary Sieve Shaker, referred to as Sieve Shaker for short, by stacking 1-7 layers of sieves with different meshes, due to the reciprocating vibration and slapping vibration of the slap-type Rotary Sieve Shaker, the pile of test sieves is shaken to make the materials fall from all the sieves down and snap into each of the different sized openings. Designed to obtain consistent, repeatable results that are more repeatable than manual sieving without the problem of material clogging the screen surface and can be reused frequently.

The following is the parameter configuration of the slap-style Rotary Sieve Shaker:

NO	Name	Unit	Parameter
1	Sieve diameter	mm	Φ200
2	The quantity of layer	s	1-7
3	Number of revolution	Timed/min	290±6
4	tapping	Timed/min	1-4
5	Tapping height	KN	38±6
6	Levelness of the base	mm/min	≤0.6
7	Motor powder	KW	0.37
8	Powder supply	V	380,220
9	Outside dimension	LWH	433*432*785
10	Rotation distance	mm	25

After introducing the above two common Rotary Sieve Shakers, what is the difference between these two Rotary Sieve Shakers?

In fact, the top-hit Rotary Sieve Shaker and the slap-type Rotary Sieve Shaker are different in principle, that is, the vibration mode. The purpose of the two is similar, which is to promote the rapid penetration of materials in the screen sieve to avoid clogging of the sieve holes. But in practice, the slapping Rotary Sieve Shaker is more common.

The two common types of Rotary Sieve Shaker have been introduced, I hope it will help you~