Slap Type Test Sieve Structure and Principle

Thursday February-23 2023  14:52:44

Slap Type Test Sieve is mainly composed of slap hammer, hammer stroke adjustment lever, hammer transmission gear, stainless steel screen frame, screen frame tray, timing switch device, motor and base from top to bottom

Motor - timing switch device - hammer transmission gear - hammer stroke adjustment lever - slapping hammer

The motor provides power for the operation of the machine. The screening time is set according to the material condition and the expected screening results, and the switch is turned on. After the power passes through the synchronous belt and the transmission gear changes speed, it drives the main shaft to move, and the main shaft drives the eccentric wheel to make the slide plate drive the test. The sieve shakes from side to side, and the slapping weight and the stroke adjustment rod of the weight move. The function of the stroke adjustment rod is to control the lifting height of the weight, that is, the slapping force. .

Stainless Steel Screen Frame - Screen Frame Tray

According to the actual situation of the material and the requirements of particle size classification, select the screen frame with different meshes, place the screen frame on the tray, adjust the height of the tray, and carry out material screening.

During this process, the materials in the sieve frame are screened layer by layer by the large-aperture sieve, and are screened into the sieve frame layers with different meshes according to their own different particle sizes.

In addition to the side-to-side shaking motion of ordinary sieve machines, the top slapping motion of the Slap Type Test Sieve will increase the specific gravity of the undersize (fine material) of the sieved material to a certain extent.