How does Rotap Sieve Shaker work?

Friday March-10 2023  09:42:14

Rotap sieve shaker can screen products with various characteristics. It is suitable for the inspection of the particle size composition of ordinary abrasives and the production classification and particle size composition inspection of superhard materials. It is also widely used in geology, metallurgy, chemical industry, powder, medicine, construction cement and other departments. Scientific research and production laboratory, with functions such as screening and testing of materials. Regarding the working principle of Rotap sieve shaker, the following is a detailed introduction:

Rotap Sieve Shaker Working Principle

The Rotap sieve shaker uses a vibration motor to drive the gear, and the gear rotates to transmit the power to the main shaft according to the synchronous belt. After the gear is adjusted, the main shaft starts to rotate according to the specified rotation speed, and the bearing of the main shaft drives the eccentric wheel to make the skateboard reciprocate. At this time, the shaking of the tray will drive the screen frame. At the same time, the small hammer on the upper part of the screen frame will be beaten regularly, so that the materials in the screen frame will be screened layer by layer. During operation, there are two kinds of motions: slap/vibration.

Rotap Sieve Shaker Workflow

Before the Rotap sieve shaker works, the prepared sieve frames should be placed in layers according to the mesh specifications from large to small, and from top to bottom. After the tray is raised to a suitable position, tighten the fastening screws to ensure that it will not loosen. , then cover the flip cover, put down the hammer, then turn on the power and adjust the sieving time, and the Rotap sieve shaker can start working.