200mm Test Sieve Shaker

What is 200mm Test Sieve Shaker?

The 200mm Test Sieve Shaker is a test sieve frame that can be installed with a standard test sieve frame with a diameter of 200mm. It is a common equipment for analyzing and testing samples collected in the test sieve; the sieve is produced in strict accordance with the GB6003.1-1997 standard and can be sieved to 0.025-3mm. It is a commonly used laboratory equipment for precise screening, filtration and detection of solid content and impurities.

200mm Test Sieve Shaker Specifications

1. Screen surface: 304 stainless steel / brass / chrome plate / nylon

2. Screen frame: 304 stainless steel / brass / chrome plate / nylon

The screen frame is flat, the finish is high, and the assembly and interchangeability of the set of screens are good.

3. Screening tools: scientific design, compact structure, high screen surface tension, high aperture, regular screen frame shape and complete specifications.

4. Diameter: 200mm

5. Height: 50mm

6. Mesh: 1-500 mesh

7. Special specifications can be customized according to customer requirements

NO.	Name	Unit	Parameter
1	frame diameter	mm	200
2	the number of layer	s	1~8
3	sieve size	mm	0.025-3
4	vibrating amplitube	mm	1~4
5	vibration frequency	n/min	1440
6	power supply	V;HZ;KW	220;50;0.12
7	outside dimension	LWH	350*350*(300+n*56)
8	machine weight	kg	36
9	time alarm	s	999
10	noise	db	Less than 50

200mm Test Sieve Shaker Application

200mm test sieve shaker can be used for particle size analysis and detection of granular materials such as flour, traditional Chinese medicine powder, soil, grain, coal powder, steel shot, glass powder, sand aggregate, abrasive, seasoning, etc. It is commonly used in metallurgy, powder, chemical industry, Scientific research and production, laboratories, quality inspection rooms, laboratories of colleges and universities in medicine, building materials, geology, national defense and other departments.

200mm Test Sieve Shaker Screen Material

The material of the 200mm test sieve is divided into three types: metal woven mesh, punched plate mesh and electroformed mesh, each of which has different characteristics and application ranges.

wire woven mesh (widely used mesh from 2.36mm to 0.02mm only square mesh).

Punching plate screen (mainly used in large mesh, there are two types of meshes, round holes and square holes, from 0.2 to several hundred millimeters).

Electroforming screen (mainly used in high-precision occasions, each mesh can be within the average error range). As a professional manufacturer of standard sieves, you must have a tool microscope and a projector. The tool microscope is used to check the accuracy of the mesh, using the arithmetic mean method (the current method is the normal distribution method).

200mm Test Sieve Shaker Features

Diameter 200mm: common laboratory equipment, can be sieved to 0.025-3mm

304 stainless steel material: the shell is made of thickened 304 stainless steel material, clean and hygienic, easy to clean and anti-corrosion

Double-layer thickened screen: double-layer thickened, integrally formed, mesh number can be selected according to requirements

Timing: The screening time is controlled by the time relay, which can be set freely from 0 to 99 minutes to ensure the repeatability of the test

1-7 layers of sieve frame: one material can be screened out of 2-7 kinds of particle segments

200mm Test Sieve Shaker Principle

The 200mm Test Sieve Shaker uses the vibration motor as the vibration source. The vibration of the vibration motor drives the vibration of the base of the sieve machine, and then transmits it to the 200mm test sieve frame placed on the base through the base, so that the material particles smaller than the mesh on the screen surface are sieved into the sieve. The lower layer of the test sieve is screened layer by layer, so that only materials with the same particle size are left in the sieve frame of each layer. To achieve the separation of different particle sizes and determine the particle size composition of this material.

200mm Test Sieve Shaker Mesh and Aperture

Number	Mesh（mm）	Number	Mesh（mm）	Number	Mesh（mm）	Number	Mesh（mm）
2	13	26	0.71	90	0.16	260	0.06
3	6.5	28	0.63	100	0.154	280	0.055
4	5	30	0.6	110	0.14	300	0.054
5	4	32	0.55	115	0.13	320	0.048
6	3.2	36	0.5	120	0.125	325	0.045
7	2.8	40	0.45	130	0.111	350	0.041
8	2.5	45	0.4	140	0.105	360	0.4
9	2.2	50	0.355	150	0.1	400	0.0385
10	2	55	0.315	160	0.098	500	0.03
12	1.6	60	0.3	180	0.09
14	1.43	65	0.25	190	0.08
16	1.25	70	0.22	200	0.075
18	1	75	0.2	220	0.07
20	0.9	80	0.18	240	0.065
24	0.8	85	0.17	250	0.063
Stainless steel sieve specifications, if you need special specifications, you can contact online customer service consultation.

200mm test sieve shaker detail display

The upper part of the 200mm test sieve shaker is composed of fixed brass nuts, pressure plates, sieve covers, sieve frames, middle sieve frames, sieve bottoms, equidistant adjustment rods and other components. All components are made of high-quality SUS304 stainless steel. Flexible configuration and high interchangeability

200mm Test Sieve Shaker Manufacturer

Dahan 200mm Test Sieve Shaker manufacturer provides 200mm Test Sieve, stainless steel 200mm Test Sieve Shaker, ultrasonic 200mm Test Sieve Shaker, electromagnetic 200mm Test Sieve Shaker, magnetic levitation 200mm Test Sieve Shaker, clapping 200mm Test Sieve Shaker, top impact 200mm Test Sieve Shaker and other equipment, factory direct sales, materials are stainless steel, brass, etc., the screen is divided into woven mesh, punching plate, electroforming, etc.